CISMA 2023 BOOTH W5-E71
Sewing Machine Supplier in China
AXIS Rh 9820 Eyelet buttonhole sewing machine
RH 9820 sewing machine Electronic eyelet button hole
1.Rh 9820 sewing machine computereized system is 100% same as brothers ,
2.STRONG H knife A quality
3.JAPAN TIMING BELT
4.80 % SPARE PARTS ARE FROM BROTHER SPARE PARTS MANUFACTORIES
Fine stitches are available
Precision of stitch point has been improved
Skipped stitches are reduced
Large arm pocket providing ease of operation
Sewing with less noise
Easy maintenance
Centralized lubrication system
Thread waste can be collected
Eyelet cloth chips can be cleared
Operation panel easy to use for everyone
rh 9820 sewing machine parameter
| Specifications | Axis 9820-00 | Axis 9820-01 | Axis-9820-02 | ||
| L2230 | L1826*1 | ||||
| Thread
trimmer |
Upper thread
trimmer |
Long thread cut | Long thread cut | Short thread cut | |
| Lower thread
trimmer |
None | Long thread cut | Short thread cut | ||
| Main applications | Ladies’ wear | Men’s wear, casual wear | Jeans | Jeans, trousers | |
| Other applications | Men’s wear, casual wear, | Ladies’ wear, | |||
| jeans, trousers | jeans, trousers | ||||
| Features | Only the upper thread is cut by the | All the threads are cut long by the | All the threads are cut short by the | ||
| thread trimmer. Buttonholes up to | thread trimmers. The long thread | thread trimmers. This saves the | |||
| 50 mm long can be sewn. | ends can be securely held in the | trouble of manual trimming and | |||
| subsequent process. It is suitable | reduces consumption of the thread. | ||||
| for cases that require accurate | |||||
| short end or manual trimming. | |||||
| Sewing shape | |||||
| Sewing length | Eyelet buttonhole : 8-50 mm | Eyelet buttonhole : 8-42 mm | 22-30 mm | 18-26 mm | |
| Straight buttonhole : 5-50 mm | Straight buttonhole : 5-42 mm | L1422 (14-22 mm)*3 | L1422 (14-22 mm)*3 | ||
| L1826 (18-26 mm)*3 | L2230 (22-30 mm)*3 | ||||
| L2634 (26-34 mm)*3 | L2634 (26-34 mm)*3 | ||||
| L3442 (34-42 mm)*3 | L3442 (34-42 mm)*3 | ||||
| Length of work clamp (Standard) | 30 mm | 30 mm | 26 mm | ||
| Length of hammer (Standard) | 22 mm | 24 mm | 20 mm | ||
| Length of hammer (Accessory) | 30 mm | 28 mm | 24 mm | ||
| Sewing speed | 1,000-2,500 sti/min | ||||
| Stitch pitch | 0.5-2.0 mm | ||||
| Zigzag width | 1.5 – 5.0 mm (Up to 4.0 mm in mechanical, up to 5.0 mm with zigzag width compensation) | ||||
| Zigzag width (Factory setting) | 2.5mm | 3mm | |||
| Taper bartack length | 0-20mm | ||||
| Height of work clamp | 12 mm as standard (Available up to 16 mm) | 16mm | |||
| Starting method | Foot switch (Treadle type, Two-pedal type), Hand switch (Two-lever type) | ||||
| Feed mechanism | Intermittent feed by 3 pulse motors (X, Y,θ) | ||||
| Needle*4 | DOx558 Nm80 – Nm120 (SCHMETZ) | ||||
| Needle(Factory setting)*5 | DOx558-Nm100 | DOx558-Nm90 | DOx558-Nm110 | ||
| Languages supported | Japanese, English, Chinese, German, French, Spanish, Italian, | ||||
| for operation panel | Portuguese, Turkish, Indonesian, Vietnamese and Russian | ||||
| Safety equipment | Emergency stop function and built-in automatic stopping device activated by safety circuit in case of trouble | ||||
| Upper shaft motor | AC servo motor 550W | ||||
| Air pressure | Main regulator: 0.5 Mpa, Hammer pressure regulator: 0.4 MPa | ||||
| Air consumption | 43.2 l/min. (8 cycles/min.) | ||||
| Weight | Machine head: Approx. 120 kg.,Operation panel: Approx. 0.6 kg., Control box: 14.2-16.2 kg. (depending on the destination) | ||||
| Power supply | Single phase 100V/200V, 3-phase 200V/220V/380V/400V, 400VA | ||||
Garment Sewing Machine | Automotive Sewing Machine | Heavy Duty Sewing Machine | Upholstery Sewing Machine
Fill out my online form.
